Utility pumps, also known as water transfer pumps, are available in a variety of sizes, but the function of these pumps built to withstand difficult applications is the same – to move water from one location to another.
Some pumps can discharge the water whether the pump is sitting up or lying on its side, while others are designed to handle liquids up to 200 degrees Fahrenheit. A fair amount of utility pumps can also run dry for an extended period without damage.
Utility pumps should not be used for pumping gasoline and fuel oil mixtures, detergents, acids, chemicals, beverages, pesticides, fertilizers, or any other flammable liquid or corrosive. If the water contains hard or soft solids, such as mud, leaves, small twigs, sand, and sludge, a trash pump is required.
When choosing a utility pump, consider:
- Discharge capacity: Gallons per minute or the rate of speed that the water flows from the water source to the discharge point.
- Horsepower: The higher the horsepower, the greater the gpm or the amount of pressure provided.
- Maximum head lift: The amount of pressure required to push the liquid to the point of discharge. Note that as the distance from the water level to the point of discharge increases, pump output decreases.
- Vertical suction lift: The vertical distance that a pump may be placed above the water level and be able to draw water.
Utility pumps can be powered in several ways. Depending on the application, you can find utility pumps that operate on DC power (for example pumping water out of a boat); AC power; fossil fuel; and hydraulics. JMI also has gas engine and diesel driven water transfer pumps available for quotes.
It is best to base your selection on how you need to use the pump. If you are transferring water from locations that are (for the most part) dry, then a non-submersible model will do. But if you need to pump water out of a pond, hot tub, or pool, select a submersible model whose motor is enclosed with watertight housing.
JMI offers utility/transfer pumps for commercial and residential applications. For more information, contact us at 262-253-1353 or sales@jmipumps.com.